Top 10 Best Gear Ratio For Traxxas Slash 4×4 With Expert Recommendation

Last Update:

Our team studied on 54028 reviews available online for Gear Ratio For Traxxas Slash 4x4, chose the finest ones and prepared Gear Ratio For Traxxas Slash 4x4 Reviews for you. It was very difficult to shortlist the ideal Gear Ratio For Traxxas Slash 4x4 from thousands of products online. However, We tried to make sure that you get only the Best Gear Ratio For Traxxas Slash 4x4 from our suggestions. Check our listings-:

Top 10 Gear Ratio For Traxxas Slash 4x4 Reviews 2022 Comparison Chart

We found 54028 reviews when researching. We have considered users feedback on the Gear Ratio For Traxxas Slash 4x4 and our suggestions includes only the finest of them in this article.

NoProductScoreAction
1Traxxas 3956 Spur gear9.8Check Price On Amazon
2Raidenracing Hardened Steel 54T SPUR Main Gear for TRAXXAS 1/10 Slash Stampede Rsutler 4x4 6804 6807 6808 6708 Replace#39569.6Check Price On Amazon
3Zeberoxyz 2PCS Set GT2 Synchronous Wheel 20&60 Teeth 8mm Bore Aluminum Timing Pulley with 2PCS Length 200mm Width 6mm Belt (20-60T-8B-6)9.2Check Price On Amazon
4Sumind 5 Pieces 54T 0.8 32 Pitch Plastic Spur Gear Compatible with 4x4 VXL Rally VXL HPS HPI RC Car and Boat9Check Price On Amazon
5Traxxas 3949X 19-Tooth Hardened Steel Pinion Gear (32 Pitch)8.8Check Price On Amazon
6Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash8.8Check Price On Amazon
732P Hardened Pinion Gear Set 1/8 inch Hole 17T 18T 19T 20T 21T with Hex Key (Compatible with 0.8 Metric Pitch)8.6Check Price On Amazon
848P 19T 20T 21T 22T 23T Pinion Gear with Screw Driver for 3.175mm Shaft 1/10 RC Brushless Brush Motor by MakerDoIt8.6Check Price On Amazon
9AIYIHOBBY Metal Steel 6878 Differential Gear Complete Slipper Clutch and 32P 15T/17T/19T Pinions Gear Set for Traxxas Slash 4X4 / Stampede 4X4 / Rustle 4X4 Replace 68788.6Check Price On Amazon
10500Pcs RC Screw Kit RC Repair Tool Kit M3 M4 Hex Screws Nut Shell Buckle Hardware Fastener for 1/8 1/10 1/12 Scale RC Cars Truck Crawler DIY Parts8.4Check Price On Amazon
Affiliate Disclaimer: As an affiliate and an Amazon Associate we earn from qualifying purchases. This page may contain affiliate links. CERTAIN CONTENT THAT APPEARS [IN THIS APPLICATION or ON THIS SITE, as applicable] COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

1. Traxxas 3956 Spur gear

  • Optional Traxxas spur gears allow you to increase or decrease the final drive ratio and tune for different applications.
  • Compatible with 32-pitch or .8 Module pinion gears
  • Tough nylon construction for high-power applications
  • One gear per package
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance
  • This is for use on RC vehicles such as the Traxxas Jato; consult your user’s manual for exact parts listings.

2. Raidenracing Hardened Steel 54T SPUR Main Gear for TRAXXAS 1/10 Slash Stampede Rsutler 4×4 6804 6807 6808 6708 Replace#3956

  • Material: Hardened Steel
  • For 1/10 SLASH STAMPEDE 4×4 Rsutler 6804 6807 6808 6708
  • Replace #3956

3. Zeberoxyz 2PCS Set GT2 Synchronous Wheel 20&60 Teeth 8mm Bore Aluminum Timing Pulley with 2PCS Length 200mm Width 6mm Belt (20-60T-8B-6)

  • Material: Made of high quality Aluminum Alloy, Surface oxidation treatment,durable, fine workmanship and high transmission accuracy.
  • Accurate transmission: without slipping at work, having a constant gear ratio
  • Smooth transmission, precise tooth pitch, High transmission efficiency, energy-saving effect
  • Simple structure: Easy to install, easy to assemble and disassemble
  • Application Scope:Widely used in milling machine, gear shaper, drilling machine, hobbing machine or other machinery transmission occasions.

4. Sumind 5 Pieces 54T 0.8 32 Pitch Plastic Spur Gear Compatible with 4×4 VXL Rally VXL HPS HPI RC Car and Boat

  • You will receive: 5 pieces of 54 tooth 0.
  • Advantage: these spur gears allow you to control(such as increase or decrease) the final drive ratio and tune according to your situation for different applications.
  • Quality materials: this plastic spur gear is made of plastic, lightweight and easy to install, you can use for a long time.
  • Wide application: the plastic spur gear is suitable for most of model car, such as compatible with 4×4 VXL Rally VXL RC vehicles, HPS.
  • Suitable size: each spur gear measures approx.

5. Traxxas 3949X 19-Tooth Hardened Steel Pinion Gear (32 Pitch)

  • 19-tooth heavy-duty pinion gear
  • Machined from hardened steel
  • Fits 3mm shafts
  • Includes set screw

6. Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear).
  • Caster steering blocks kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY.
  • Suitable for traxxas rustler steering blocks is made of aluminum alloy , more wear-resistant, not easy to deform.
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block
  • Globact slash 2WD caster blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket.

7. 32P Hardened Pinion Gear Set 1/8 inch Hole 17T 18T 19T 20T 21T with Hex Key (Compatible with 0.8 Metric Pitch)

  • Work Smoothly】Good machining made less rough and less noise than other pinions that make them roll smoothly.
  • Pitch & Teeth】32P compatible with 0.
  • Hardened】32P pinion gear set is of hardened metal construction. Last longer life.
  • Free Style】The speed depends on your gear ration.
  • 5pcs】The package included 32p 17T 18T 19T 20T 21T pinion gear and a hardened hex key.

8. 48P 19T 20T 21T 22T 23T Pinion Gear with Screw Driver for 3.175mm Shaft 1/10 RC Brushless Brush Motor by MakerDoIt

  • Durable】Durable metal construction for long-lasting performance.
  • More Funny】Provide the option of being able to change your gear ratio for different track conditions.
  • 48P is the pitch of each tooth on the pinion gear and the 19T 20T 21T 22T 23T is the number of teeth on the pinion gear.
  • 175mm】The pinion gear shaft diameter or bore is 3.
  • Gear Combo Set】Comes with set screws for each pinion gear, the pinion gear combo set also included a screwdriver, easy to install.

9. AIYIHOBBY Metal Steel 6878 Differential Gear Complete Slipper Clutch and 32P 15T/17T/19T Pinions Gear Set for Traxxas Slash 4X4 / Stampede 4X4 / Rustle 4X4 Replace 6878

  • Compatible with】Compatible with Traxxas Rustler 4X4 / Slash 4X4 Platinum / Slash 4X4 Ultimate / Slash 4X4 VXL / Slash 4X4 / Stampede 4X4 Unassembled Kit / Stampede 4X4 VXL / Stampede 4X4.
  • 54T Spur gear size】6878 metal differential is 32P 54T 0.8 metric pitch.
  • 32P pinions size】3 pinions(32P 15T/17T/19T pinions) Inner diameter: 5.
  • Hardened gears kit 】suitable for traxxa slash 4×4 slipper clutch is all metal internal gears for strength.
  • Free Style】The speed depends on your gear ration.

10. 500Pcs RC Screw Kit RC Repair Tool Kit M3 M4 Hex Screws Nut Shell Buckle Hardware Fastener for 1/8 1/10 1/12 Scale RC Cars Truck Crawler DIY Parts

  • 1. Material: High Quality Metal. Various Size Screws idea for RC Models.
  • 2. Compatibility: Fit for 1/8 1/10 RC Model Cars Crawler Truck..
  • Easy Organization and Portable: Classify and Store in different grids in a plastic case for easy usage.
  • 4. A must have for RC Model Cars Vehicles Trucks Buggy, On-Road Off Road, Short Course and Crawlers.
  • Package List: M3 and M4 Screws (Flat and Round Head), M3 Bolt Washers, Lock Nut, Shell Clip, E-Clip, Pins and O-Circle.

What Should I Look for When Buying Best Gear Ratio For Traxxas Slash 4x4?


Before buying any product, you need to consider certain factors. Each one has its strengths and specific characteristics, so depending upon your personal needs, you can decide which suits you best.

Having a good one matters because it is directly related to your safety when it comes to Gear Ratio For Traxxas Slash 4x4 Reviews. To help you make a good decision regarding the type of Gear Ratio For Traxxas Slash 4x4 Reviews you need to buy, we have made a list of every little thing that you should consider for making a purchase. That is why we have assembled a comprehensive list of the greatest Gear Ratio For Traxxas Slash 4x4 Reviews available in the current market. We have considered some questions in mind, which generally come up.

    • Is it worth buying Gear Ratio For Traxxas Slash 4x4?
    • What benefits are there with buying Best Gear Ratio For Traxxas Slash 4x4?
    • Why is it crucial to invest in any Gear Ratio For Traxxas Slash 4x4, much less the best one?
    • Which Gear Ratio For Traxxas Slash 4x4 Reviews is good in the current market?
    • Where can you find information like this about Gear Ratio For Traxxas Slash 4x4;?
    • What factors deserve consideration when shopping for an effective Gear Ratio For Traxxas Slash 4x4?
We’re convinced that you likely have far more questions than just these regarding Gear Ratio For Traxxas Slash 4x4, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Consider the Compatibility

Owning a Gear Ratio For Traxxas Slash 4x4 is serious business. You first buy a Gear Ratio For Traxxas Slash 4x4 and then buy supplies for maintaining it and cleaning it. You should also take into account the final details of Gear Ratio For Traxxas Slash 4x4 cleaning and maintenance. One of those details is the compatibility in the Gear Ratio For Traxxas Slash 4x4.Once you start looking at specifications, you realize that not all of the products are suited for your particular Gear Ratio For Traxxas Slash 4x4. Different Gear Ratio For Traxxas Slash 4x4 are made for different Gear Ratio For Traxxas Slash 4x4s. This means that you cannot have the one kind fits all kind of approach with Gear Ratio For Traxxas Slash 4x4 cleaning. Not finding the right Gear Ratio For Traxxas Slash 4x4 can become a safety hazard, so we recommend looking at the options closely.

Will it Last Long?

Before buying anything, you should pay attention to whether it will work long enough to seem worthy of the money you spent on it. There are many Gear Ratio For Traxxas Slash 4x4 in the market, and all of them have different efficiency. Having an idea of how long the effects of a particular Gear Ratio For Traxxas Slash 4x4 will last makes you prepared for future cleaning and maintenance.

Naturally, a lasting product will be more preferable to a cheaper alternative which barely makes any difference. The longer the item lasts, the more efficient your Gear Ratio For Traxxas Slash 4x4 will become. You can even say that the life of the Gear Ratio For Traxxas Slash 4x4 is directly related to the life of the product. Since Gear Ratio For Traxxas Slash 4x4 is not something, you will buy every other week, making good purchases matters.

See What Others Think

Any product available online or offline can be judged on whether it suits the needs of the buyer or not. There is a good chance that depending on the compatibility of your Gear Ratio For Traxxas Slash 4x4, other users with the same requirements have used it before you. Taking advantage of their experience is something that will be extremely helpful for you as a new buyer.

Each product will have certain negative reviews along with a lot of positive ones. It should be your responsibility to look at both of them to manage expectations. Most of the time, going with what the majority of people think about the product is a good approach. If you are still feeling skeptical, you can always look for other options.

Is it Toxic?

Looking at the toxicity of the components in a product is important on two accounts. First, it can prove to be detrimental to your health in the long term if you keep using a toxic product. The item may have components that are carcinogens and can cause health issues the longer you are in contact with it.

Secondly, toxic Gear Ratio For Traxxas Slash 4x4 can also be harmful to the environment. Looking at sustainable options favors both your help and the environment. Nontoxic material will also make you more confident in using it without any kind of restraint or apprehension. As is the rule: Safety First.

Final Verdict

Finally, my friends, I hope you’re staying healthy, are feeling confident in your informed decisions, and that we helped to illuminate for you the Gear Ratio For Traxxas Slash 4x4 that can be very overwhelming. Cheers!

When looking for what Gear Ratio For Traxxas Slash 4x4 is best for your family, there are a plethora of brands selling wonderful and effective products. Take a few moments to assess your needs of you and what you value most before choosing the product that is right for you. And remember you should feel great after choosing a Gear Ratio For Traxxas Slash 4x4; for you for your friends or family.

Leave a Comment

Your email address will not be published. Required fields are marked *